GE · DISPLAY WITH HOSE MODULE ±0.5 % Diesel Diesel NEW GE · 230 VAC · Display with hose module with volume preset 253400200 GE · 12-24 VDC · Display with hose module with volume preset 253400300 6-digit electronic console with luminous display of liquid crystal, powered at 230 VAC or 12-24 VDC, which allows to: See the partial and total of the supplied volume. Connect to different types of meters with pulsers of 1 or 2 channels. Preset the volume to be supplied, connecting it to a pump and/or solenoid valve. Connect it to an external switch or nozzle holder. Connect it to the GK-7M controller through the RS-485 communication bus and the GESPASA communication protocol. KEYPAD FUNCTIONS: - TOTAL / EXIT: It shows the Total of the volume: By keeping pressed this key, the display shows the total of the supplied volume. Press 'TOTAL' to cancel the volume preset. - Key X10: It allows to preset. It increases 10 units each touch. When keeping pressed, it gets automatically increased. - Key X1: It allows to preset. It increases 1 unit each touch. When keeping pressed, it gets automatically increased. If the volume is among 0.00 and 9999.99, two decimals are shown. If the volume is among 10000.0 and 99999.9, it only has one decimal. If the volume is equal to or higher than 100000, no decimal is shown. Size and weight (approx.): Dim.: 250x150x300 mm (length x width x height) Weight: 4.15 kg For inquiries or custom requirements, contact us: 📞 +91 78020 02853